one way bearing

The purpose of the one way bearing is to guide and prevent the radial run-out of an axis when the clutch is separated. The engine torque passes through the Flywheel, the clutch housing, the pressure plate, the clutch driven plate to a shaft. When enabled, the automated racing gearbox has a very short changeover time, and this bearing allows exposure to very high speed gradients. This also creates special requirements for bearings and bearing lubricants. Choosing the right bearing design, grease, and even coating at this location is critical to the robustness of the solution.http://www.zysbearing.com/one-way-bearings/